1.Drying herb: pseudo-ginseng, aniseed, Chinese yam, sea cucumber, honeysuckle ect.
2.Drying agriculture products: dragon fruit flower, rose, mushroom, red pepper ect.
3.Drying fruit: banana, apple , mango, date, wolfberry, lemon, olive ect.
4.Drying seafood: sea fish, shrimp, seaear, cuttlefish ect.
5.Drying tea: puer, red tea, ect.
6.Drying food: noodle, sausage, preserved pork, beancurd sticks ect.
7.Drying incense: incense, mosquito incense ect,
8.Drying wood: redwood, redwood furniture ect.
Certification
Application Project
- Drying herb: pseudo-ginseng, aniseed, Chinese yam, sea cucumber, honeysuckle ect.
- Drying agriculture products: dragon fruit flower, rose, mushroom, red pepper ect.
- Drying fruit: banana, apple , mango, date, wolfberry, lemon, olive ect.
- Drying seafood: sea fish, shrimp, seaear, cuttlefish ect.
- Drying tea: puer, red tea, ect.
- Drying food: noodle, sausage, preserved pork, beancurd sticks ect.
- Drying incense: incense, mosquito incense ect,
- Drying wood: redwood, redwood furniture ect.
Advantage of Kinkai rubber dryer
KINKAI air source heat pump dryer makes higher use of heat source, saves energy and protect the environment. Compared with the oil or coal-burning drying equipment in the natural rubber processing industry, KINKAI dryer controls the temperature on a stable basis. Its control system is capable of set the temperature for various time periods. It also controls the temperature on a smart basis. The unit can adjust the drying time and temperature based on the requirements of the drying process on multi time periods. The smart control achieved by using the temperature and humanity curve program fully protects and enhances the reasonable performance indexes of the natural rubber, and reduces the drying cost. In addition, KINKAI dryer is under phase-lose and high and low-pressure protection, reducing the fire risks and enhancing the productivity of rubber.
Product Principle
1, Dryer evaporator of refrigerant absorb the air from outside.
2, Then compressor works that make the air temperature rise.
3, Heat exchanger change the hot air into drying chamber.
4, Final materials will be dried by the hot air circulating in drying chamber.
Product Component
Component Of Main Engine
The Single Type and Double Type
Advantage Of Kinkai Heat Pump Dryer
1.Energy saving & Environmental protection
Adopt close dehumidify + hot air circulating drying type, saving operating cost; Without waste gas and waste heat pollution, low noise.
2.Running Stable, operating easily
PLC + Touch Screen, running stable,operating easily; Adopt PLC control, can setting different dryiing curve, Suitable for drying different materials.
3.Second waste heat recovery technology(patent)
Adopt air to air heat exchanger dehumidify and recovery waste heat at the same time, saving energy more than 70%.
4.Exact control temperature and humidity
According to different material setting different drying curve, the heat pump dryer can control the drying chamber temperature between 10-75ºC.
5.Recovery volatilized component
Some kinds of material contain volatilized component, in drying processing, hot and wet air will become condenser water then drain, collect the condenser water so that collect volatilized component.
Technical Parameters
Single dryer + Drying chamber | ||||
Model | Unit | JK03RD | JK06RD | JK12RD |
Power input | KW | 5.5 | 9.5 | 19.4 |
Power supply | V/PH/ HZ | 380V3PH,50/60HZ 220V/1PH,50/60HZ | 380V/3PH,50/60HZ | |
Rated current | A | 11A(380V),25A(220V) | 19.0 | 39.0 |
Heating capacity | KW | 10.5 | 21.0 | 42.0 |
Cooling capacity | KW | 7.8 | 18.0 | 32.0 |
Dehumidify | L/H | 12.0 | 25.0 | 50.0 |
Max temperature | ºC | <75 | <75 | <75 |
Working condition | ºC | 0-43 | 0-43 | 0-43 |
Electric shock protection grade | I | I | I | |
Max exhause pressure | Mpa | 3.0 | 3.0 | 3.0 |
Noise | dB(A) | 75 | 75 | 75 |
Power consumption | KWH | 4.8 | 8.5 | 15.0 |
Electric heater | KW | 3.0 | 6.0 | 12.0 |
Blowing type | / | HORIZONTAL BLOWING 360° | ||
Dimension of dryer | MM | 1650x856x1280 | 1650x1056x1280 | 2250x1360x1590 |
Weight | KG | 180 | 285 | 480 |
Double dryer + Drying chamber | ||||
Model | Unit | JK03RD(*2) | JK06RD(*2) | JK12RD(*2) |
Power input | KW | 11.0 | 18.4 | 32.8 |
Power supply | V/PH/ HZ | 380V3PH,50/60HZ 220V/1PH,50/60HZ | 380V/3PH,50/60HZ | |
Rated current | A | 22A(380V),50A(220V) | 37.0 | 66.0 |
Heating capacity | KW | 21.0 | 42.0 | 84.0 |
Cooling capacity | KW | 15.6 | 36.0 | 64.0 |
Dehumidify | L/H | 24.0 | 50.0 | 100.0 |
Max temperature | ºC | <=75 | <=75 | <=75 |
Working condition | ºC | 0-43 | 0-43 | 0-43 |
Electric shock protection grade | I | I | I | |
Max exhause pressure | Mpa | 3.0 | 3.0 | 3.0 |
Noise | dB(A) | <=75 | <=75 | <=75 |
Power consumption | KWH | 9.6 | 17.0 | 30.0 |
Electric heater | KW | 6.0 | 12.0 | 24.0 |
Blowing type | / | HORIZONTAL BLOWING 360° | ||
Dimension of dryer | MM | 1650x856x1280 | 1650x1056x1280 | 2250x1360x1590 |
Weight | KG | 180(*2) | 285(*2) | 480(*2) |
Recommend Dryer + Drying Chamber Sizes | |||
Item | Description | Product Capacity | Drying Chamber Sizes |
1 | One unit JK03RD dryer+drying chamber | 300KG/batch | 3160*2070*2200mm |
2 | One unit JK06RD dryer+drying chamber | 600KG/batch | 5700*2170*2200mm |
3 | One unit JK12RD dryer+drying chamber | 1200KG/batch | 5810*3230*2200mm |
4 | Two unit JK03RD dryer+drying chamber | 800KG/batch | 7510*2070*2200mm |
5 | Two unit JK06RD dryer+drying chamber | 1500KG/batch | 10530*2170*2200mm |
6 | Two unit JK12RD dryer+drying chamber | 3000KG/batch | 10750*3230*2200mm |
If you are interested in our drying machine products, please contact us.